Aluminium Food Container Machine C-Type Compatible with Thin and Thick Foil

If you often struggle with machine instability or high scrap rates when switching between thin and thick aluminum foil for food container production, this C-type machine is a more reliable choice.

The key advantage of this Aluminium Food Container Machine C Type is straightforward: it runs both thin and thick foil consistently. You don't need to adjust parameters for different material thicknesses. That means less downtime and less material waste.

The frame is a solid "C" type design. Many machines on the market use hollow beds to save cost, which can deform over time. We use a solid bed with a higher working table. The goal is simple: better stability during stamping. The difference is most noticeable when running thin foil. The main frame is designed for over 30 years of service life.

For production speed, the LK-T63 model is designed for three-cavity molds. The average stamping speed is 50 strokes per minute, giving you 9,000 to 12,000 pieces per hour. One operator handles one machine. During normal operation, they just need to refill material and clear finished products. If the safety door is opened while running, the machine stops automatically.

For mold changes, we include a hydraulic pump and mold lifting arms. One worker can change a mold in about 15 minutes. No wrenches or heavy hammering needed. The machine stores parameters for up to 60 molds. After changing the mold, just recall the saved settings.

If a problem occurs, the system stops and shows the issue on the touchscreen. Your maintenance person doesn't need to search the whole machine. The screen points to the area to check.

• Runs both thin and thick foil: The mold and drive system are optimized for 0.025mm thin foil but can also handle 0.2mm thick foil. Many machines struggle with thin foil causing wrinkles or tears. This one doesn't.
• Fast mold changes, less downtime: Hydraulic pump and mold lifting arms are standard. One worker changes a mold in about 15 minutes. No need to wait for a maintenance technician.
• Faults show on screen: When a problem occurs, the machine stops and the touchscreen shows the issue type and location. Your electrician or operator checks the indicated area, not the whole machine.
• Stores mold parameters: Memory for 60 mold settings. When switching products, just recall the saved parameters. No need to reset positions and strokes each time.
• Safety door interlock: If the safety door is opened during normal operation, the machine stops immediately. Basic protection for your operator.
• Common brand components: Mitsubishi, Schneider, SMC, Airtac. These are widely available. If a sensor or valve fails, you can find a replacement locally without waiting for a shipment from us.
• Solid build for long-term stability: Solid bed + C-type frame + higher working table. These aren't cosmetic features. They keep the machine stable during continuous running and extend mold life.